Видео

Could you create a torshional spring mechanism in Creo?

Thanks

Very nice video sir❤

Good morning ! Thank you again for your incredible tutorial, it’s always something that’s very useful (I work at Schneider Electric as a designer). I wanted to know if you were able to make a tutorial to successfully do what is in this video: ruclips.net/video/uwIwKAga44s/видео.html I find that unlike solidworks, without your channel there is very little tutorial and even less concerning mechanical movements/animations for conveyors, pick and place and 6-axis robots. Currently I am working on a project with a Staübli TX2 90 XL and I would need to make an animation on CREO of the robot which takes products from a conveyor to do pick and place. If you do the tutorial you will save me! Thanks in advance

감사합니다. Thanks a lot

Thats amazing 👍

Anti-aliasing was the key for me! Grazie!

Bro you are Bob Ross of creo... simply Awsome !! i dont like ur videos .. i just Love it !!

Great job pal

On some surfaces the draft is missing. Also, using splines is not a great idea because a lot of flexes arise along the profile of the geometries to be extruded.

I have question here.. Can I load these layer saves in drawing???? I want save layer in modeling and load simply at drawing.

Here is how to change the color of a part based on its material using relations in Creo:

with nut & bolt simulation it is very help full for us

creo parametric screw jack load simulate please ......

That's something new,Thanx for it👍

You solved my most important question about controlling those points

Really nice initiative Sir very happy to see something like this 🥰🥰🥰🥰🥰

That is so cool. Thank you !!

Nice👍🏻

Hi! Is possible With Express generate viewing embedded in a browser?

If your cat really is drunk that's messed up and it should be taken from you

Thank you very much Vladimir, have a nice day!

As always, Very Informative.

want know the circular error in assy.

Plz make a video about stock length table and cut list

Thank you so much for your sharing.

thanks, dude. the only one who could explain that

Sir i have a case i have to give 3mm thickness to them when i shell the case its only take 1.7mm thickness can you please tell me another method toh give 3mm thickness to case

Very useful as always Vladimir. Have a great day.

Hi Vladimir, Is there a way that you share the parts/assembly model to practice at home? Thanks in advance

👍

I wish I had previously known some of the shortcuts you mentioned in this video, it would have made my work a lot easier anyway better late than never😅😅

Hello, what could be the reason then some model dimensions could not been shown in drawing? I have a dim from plane to plane, an extrusion depth, and others than can't be called to been shown in drawing in any view

Is there really no other way?

Nice video but what is the song?

Hii, can you tell me that how to calculate the net load of any mechanism which contains the springs?

very good.🤩 excellent explanation. One day I'll buy you a coffee.. lol😁

Amazing work I really appreciate your videos and the simple but detailed way in which you explain.

I'm not satisfied this video 🙏

Please share detail boss

Fack

Hello. i followed your steps and it does not work. i get alwayes this error: The preserved geometry is completely outside the starting geometry. Include the preserved geometry in the starting geometry. What can i do?

Sir plz can u make video how to design WIRE CABLE BOBBIN

thank you very much

Amazing reference modelling🙌

Thanks for the video, i would like to know if there is something similar but while using windchill

I get "Only one loop per subsection is allowed" after selecting all my lines... any tips?

First of all, congratulations on the initiative, I'm just starting out at Creo and I have a question that I can't solve yet. How do I import a .SLT/.STP file, then how can I edit it and place it in the plans I want to work on (this is driving me crazy! lol). Is there any way you can help me in this regard? Thank you and congratulations once again

Hello Vladimir, 1) Is there a way to control the thickness of dimension lines and leaders (in theory pen 2) separate from the Geometry (solid lines, contours) (in theory that must be pen 1) ? At the moment, they are all controlled by pen 1, (and not just the thickenns, but also the color) (i want the dimension lines and notes in RED, the axes and center marks in GREEN, and all the rest in black, and i obtained that with a workaround: didn't set a color in pentable for pen 1, and made all the dimensions, leaderboards and notes red, "manually", from the drawing - Format. In that way, the geometry lines are still black, just the dimensions are red ). I searched for line_style_standard, but it didn't exist in Creo 9 OR am I false, and "pen 2" controls just the text of dimensions ? Is that normal to have the dimension lines thickness the same width as the geometry contour lines ? 2) I also want to set certain gap dimensions for the axes, simetry lines, center marks ... How can i achieve that upon config.pro or the pentable ? My pentable looks like this: pen 1 thickness 0.008 cm; pen 2 thickness 0.001 cm; color 0.0 1.0 0.0; pen 3 thickness 0.004 cm; color 0.0 0.0 0.0; pen 4 thickness 0.001 cm; color 0.0 0.0 0.0; pen 5 thickness 0.008 cm; color 0.0 0.0 0.0; pen 6 thickness 0.004 cm; color 0.0 0.0 0.0; pen 7 thickness 0.001 cm; color 0.0 0.0 0.0; pen 8 thickness 0.001 cm; color 0.0 0.0 0.0;

You did a good work bro. Can you please tell me what the name of the component.. Please